Instructables

How To Make The Tornado Paper Airplane

Featured

Step 2: Begin Construction

Picture of Begin Construction
142_5506.JPG
Begin making your Tornado by marking out a box of 10 by 10 boxes, with a 1 by 2 additional outcropping on a single sheet of graph paper. At the top, mark a solid line 6 boxes in length, every 2 boxes from the corners of the main box. From this line, mark a dotted line that stretches from the side of the boxes to the other, including the outcropping. Below the vertical lines intersection with the horizontal line, extend them as dotted lines.

Your Tornado should now look as pictured. Cut the airframe out along the solid outer line.

Solid lines indicate places to cut. Dotted lines indicate fold lines.

Note
: 1 box = 0.25 inches
 
Remove these adsRemove these ads by Signing Up