Remove these ads by
Signing UpStep 1: The Basics. Start With Oil.
Here's what you need:
Neatsfoot Oil-there are plenty of oils and creams out there that all promise to do various things. For my money (and probably yours if you are on here, we are a thrifty lot!), nothing is better than good old Neatsfoot Oil. My company supplies us with Fiebing Brand, and we keep a bottle in the office to work on our boots when we have the time. Additionally, I keep a bottle at home, as I like to oil them right after I dry them overnight. The 32 ounce size shown here will probably last a lifetime unless you have an army.
Store your oil bottle in a zip-loc bag-the design of the bottle creates dribbles and it always ends up on the bottom of your bottle, leaving a nice oily rectangle wherever you put it down. NOTE:it is important to know that Neatsfoot oil will darken the finish of your leather-if your Docs are that perfect shade to match your handbag now, oiling them will change the shade substantially.










































Visit Our Store »
Go Pro Today »




This is how the military "trains" it's new recruits (or at least did 20 years ago when I joined.) Note, combat boots (the old leather ones) cost about $8 to make. They were CHEAP boots. But they lasted well because soldiers always had to polish them and keep them clean and rotate wearing them.
As for the DuraShok soles, do they make a military boot? I still got a few years before the Army tells me to go away, and I know I have LOTS of ruck marches left in me. I'd like to try a set if I could find a pair that were authorized. Thanks for the 'ible again!
http://www.instructables.com/id/PVC-Boot-Warmer/
They are leather, but the cover over the steel cap is synthetic. They also have a zipper up the other side, unseen in the picture.
what would you recommend for this?
www.gothicshoes.com.au/components/com_virtuemart/shop_image/product/RIOT_20_48c385af5ba94.jpg
If you want to keep the shine, you'd have to do polish, preferably a "spit shine"-look here on the Instructables site for a good 'ible on polishing if that is what you want. I burn my polish into boots I want a shine on, with a butane lighter, then polish them by spraying water as I go. It's a process, but the results are amazing. Polishing those babies looks like it will take some time, getting around all the straps and hardware :-). Hope this helps, and good luck.