Print PDF
Favorite
Email
Step 3Attach The Cord
Next, you'll need to run the end of your AC cord through the hole you just cut in the accessory connector:
1. Push, pull and otherwise force the wire through, with the AC prongs facing the bottom (you'll connect these to the extension cord when you want to run power to the tool). Needlenose pliers were helpful for me on this step.
2. Attach thin strips of duct tape around the cord, right by where the cord enters the accessory connector.
3. Strip the ends of the extension cord's wire.
1. Push, pull and otherwise force the wire through, with the AC prongs facing the bottom (you'll connect these to the extension cord when you want to run power to the tool). Needlenose pliers were helpful for me on this step.
2. Attach thin strips of duct tape around the cord, right by where the cord enters the accessory connector.
3. Strip the ends of the extension cord's wire.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
