Introduction: How to Mod a Backpack

Picture of How to Mod a Backpack

Iv'e had this old backpack for two years and for me school just ended yesterday and I was going to get a new backpack for next year so I decided to see how I could mod this one.

Step 1: Get Some Tools

Picture of Get Some Tools

What you will need:

- small scissors

- glue or tape

Step 2: Strap Mod

Picture of Strap Mod

Turn the backpack over and get to the inside of the straps. Get your scissors make a cut were you want your pocket to be.

Step 3:

Picture of

Step 4:

Picture of

Now take your glue or tape and glue or tape that little flap down. Then just repeat the process to make more pockets.

Step 5: Back Outside Pocket Mod

Picture of Back Outside Pocket Mod

Take your scissors and make a cut along the padding. DON'T CUT THE STRING!

Step 6:

Picture of

Pull out the padding and cut it to make it smaller this can now fit 2 full sized altoids tins with the padding and its still comfortable.

Step 7: Second Back Outside Pocket Mod

Picture of Second Back Outside Pocket Mod

You do the exact same thing as the last mod but throw away he padding if you don't want it. And if you have take apart kitchen scissors they fit perfectly into these holders.

Step 8:

Picture of

Step 9:

There you go hope you enjoy it but don't do this to a brand new backpack do it to an old one works on most backpacks.


Seaborn (author)2014-05-24

Thx! hope you enjoy it.

rudy30 (author)2014-05-24

That's awesome I just did it good job!!!!

About This Instructable




Add instructable to: