Introduction: How to Pop-Shove-It on a Tech Deck
Todays tech deck instructable teaches you how to pop shove it on a tech deck.
Step 1: Poping the Board
To pop the board, you will put pressure on the kicktail as shown in the picture
Step 2: Shove It
First pop the board into the air, then spin or flick the board with your back finger towards you at the same time as you pop the board.
Step 3: Practicing
Practice by just spinning the board wothout adding much pop at all.
Remember- Pop the board, then flick with your back finger, then land.