How To Replace a Dryer Belt on Whirlpool Models

Step 12

Replace the front of the dryer. Make sure the small tabs on the bottom of the dryer are lined up with the small holes on the front of the dryer. Finish by screwing the front of the dryer in place, replacing the lint trap screws and replacing the lint trap. If you need to purchase a dryer belt for your dryer, check out http://www.partselect.com.

Comments

[kshirin]

Thank You! How did people do this before the internet?

[dtruly]

These instructions were a great help. Note: I have a much older dryer with the door that opens forward instead of to the side. It has springs which must be unhooked. Remove the bottom front plate and unhook the springs. Pretty easy once I figured out how it was put together.

[jpaq66]

woohoo!! I did it!!! ty ty ty ty for this service, u guys are the shizzle!!!