loading
Picture of Great Way To Save Highlighters
IMG_7201.JPG
This Instructable will help eliminate bad skipping issues with highlighters. Perfect for teachers who have to deal with highlighters that have skipping issues.

Step 1: Gather Materials

Picture of Gather Materials
IMG_7191.JPG
Materials

Sharpie Accent highlighter

cup of nail polish remover (or acetone)

Tools

A pair of pliers (I used needle-nosed pliers)

 
graydog1111 year ago

Have you tried this method with the Sharpie black permanent marker with broad tip that has quit? The tip that does the marking is only about 3/4" long. It seems I buy them and they quit marking very quickly. What a rip-off.

Great stuff! Is it possible to use both ends of the chisel tip with this highlighter?
-BLUEBLOBS2
BLUEBLOBS2 (author)  MasterfulChef3 years ago
When I took this highlighter apart, I was wondering the same exact thing. I checked and found that it is only possible to use one end of the chisel tip with these highlighters. The chisel tips are not double-sided on these Sharpie highlighters like they are on Expo pens. I wish they were, though. I would have another ible if that were so. I hope that answers your question.
-BLUEBLOBS2
sieramolly3 years ago
Is this what you did to all those highlighters you took apart? Very clever.
DIY_Mania3 years ago
This is way cool. I never would have thought that that could work..
-DIY_Mania
scoochmaroo3 years ago
So in steps 3 and 4, I'm not sure which is the "correct way" - dents up or down? Should I be putting the ink cartridge into the nail polish remover dents-first? And when I put it back in the highlighter, are the dents near the tip or the base of hte marker?
BLUEBLOBS2 (author)  scoochmaroo3 years ago
When you put the ink cartridge in the nail polish remover, you put it dents up. When you put the ink cartridge in the highlighter, you put it dents up too. I hope that helps.
-BLUEBLOBS2