Print PDF
Favorite
Email
Step 2Detach!!
Once the tabs are loose, careful not to pull the covers with force because there is still a wire attached to the motherboard from the small speaker inside the back cover. I let it be, but if you know how to detach it, be my guest.
Notice that there are 2 ribbon cables attached to the motherboard, coming out from both sides. Try to lift up the smaller cable. The big cable? I'll leave it if i were you. But if you are certain enough with what you are doing, please detach it.
There will be 2 screws (top left and below right) you need to unscrew using Philip Screwdriver. Unscrewed, you can flip the motherboard and now you can see the display.
At the navigation button, there are screws you need to unscrew.After that pull it out gently.
There's a vibrator next to the navigation button.Remove it too.
The display, use the case opener tool and pry it out. Start with the middle tabs. After that you can easily pull it out.
Notice that there are 2 ribbon cables attached to the motherboard, coming out from both sides. Try to lift up the smaller cable. The big cable? I'll leave it if i were you. But if you are certain enough with what you are doing, please detach it.
There will be 2 screws (top left and below right) you need to unscrew using Philip Screwdriver. Unscrewed, you can flip the motherboard and now you can see the display.
At the navigation button, there are screws you need to unscrew.After that pull it out gently.
There's a vibrator next to the navigation button.Remove it too.
The display, use the case opener tool and pry it out. Start with the middle tabs. After that you can easily pull it out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
