Introduction: How to Tech Deck Ollie

Picture of How to Tech Deck Ollie

This instructable is to teach you how to ollie on a fingerboard (tech deck)

Please like this instructable if it helped and you enjoyed it. Thank you

Step 1: Finger Placement

Picture of Finger Placement

Finger placement

2 fingers : middle finger flat on kicktail, index finger on the middle of the deck.

3 fingers: ring finger on the kicktail, middle finger about the middle of the deck, and index finger on the fron bolts of the deck

Step 2: Popping the Board

Picture of Popping the Board

To " pop" the board, you will put pressure on the kicktail. This part of the trick makes the board go into the air.

Step 3: Slide/jump

Picture of Slide/jump

To make the board actually go into the air flying, you must slide your index finger to the front side of the board to level it out in the air.
3 fingers: after you pop the board, apply enough pressure with your index finger to level out the board, leave your middle finger where its at.

Step 4: Practice

Picture of Practice

A great way to learn a ollie is to practice on the side of your leg. Like the following photo.


mattymattmatt2 (author)2015-09-27

i cant do it it to complecated so could you make a video?

About This Instructable




Bio: Skateboarder, fingerboarder, baseball player, guitar player, hunting, and ATV's. Living like Larry
More by ethan_mt:How To Pop-Shove-It On A Tech DeckK'nex Tech Deck Stand (holds 8 Fingerboard Decks)How To Grind And Boardslide On A Tech Deck
Add instructable to: