Introduction: How Make Airgun Nail Darts.

Picture of How Make Airgun Nail Darts.

Hi, today we will learn how to build nail darts.
It is a lot simple.
our materials are:
1    5 cm nail
1    pair of scissors
1    paper
 some tape

Now take the nail and wrap it with paper. NOTE happen conical.
Take some tape and wrap the paper not to open.

Step 1: Materials

Picture of Materials






Step 2: Wrapping the Nail With Paper

Picture of Wrapping the Nail With Paper

Step 3: Cutting the Excess Paper

Picture of Cutting the Excess Paper

Put the nail dart into the copper tube and cut the excess

Mine barrel is made ​​of 15 mm copper pipe.


de0509 (author)2012-03-17

I made mine a bit different. I made the cones first because Im fussy about how they look. then i cut the vertex a bit until the nails can go through, except the head. then i just push through and tape them, shaping the cone to fit in barrel is te same way like yours. Actually, Im considering to not tape the paper to the nails, if they are stuck on wood, just slide the cone forward and pull at the nail, prevents damage to the fragile paper cones when picking back the bullet