Introduction: How to Blink an LED Using Raspberry Pi 3 Model B

Subscribe to our YouTube Channel: https://goo.gl/Ah3izH

YouTube: https://goo.gl/LCcXcu

Instructables: https://goo.gl/gwY1Lq

Facebook: https://goo.gl/Cn2hZB

Twitter: https://goo.gl/XZufMV

Google+: https://goo.gl/5FddS1

Copyright © 2018 AVI SOFTWARE INDIA. All rights reserved.

Step 1: Components Required

Picture of Components Required

Raspberry Pi 3 Model B

LED (Red Color)

Resistor (220 Ohm)

Breadboard (MB102 400 Points)

USB Cable (Type A to Type Micro-B)

Ethernet Patch Cable (Straight)

Jumper Cable

Step 2: Circuit Schematic

Picture of Circuit Schematic

Connect Anode of LED to Pin No. 03 (GPIO02) of Raspberry Pi 3 Model B via 220 Ohm Resistor

Connect Cathode of LED to Pin No. 39 (GND) of Raspberry Pi 3 Model B

Step 3: Wiring Components As Per Circuit Schematic

Picture of Wiring Components As Per Circuit Schematic

Step 4: Coding

Check YouTube Video Description Box for Download Source Code

Step 5: Watch Project Demo

For Best Viewing Experience, Choose Video Quality to 1080p

Comments

About This Instructable

193views

3favorites

License:

Bio: Tutorials on Software | Programming | Hacking | Mobile Development | Much More
More by avisoftwareindia:How to Make Calculator Using Serial I2C 16x2 LCD Display With Arduino Uno Rev3How to Use HC-SR501 Passive Infrared (PIR) Sensor Module With Raspberry Pi 3 Model BHow to Use HC-SR501 Passive Infrared (PIR) Sensor Module With NodeMcu ESP8266
Add instructable to: