loading

Step 9: Measure out the hops

As per ingredients in Step 2.

Advertisement

<p>Brilliantly clear recipe and methodology. Thanks for this, I am definitely happier to have a go at a full mash beer myself now!</p>
hi is this the malt extract and how can i find it if were i live there are no brew suplies shops is there any other place ican find it
<p>grow rye grain (or other malts grains) in a little water till roots show, grill till amber, boil, then blend, strain, liquid is malt extract. </p>
Hi there, have a search around for an online supply. There are plenty here in England. Where do you live?
in saudi arabia and no alcohol at all we only have nonalcoholic beer and idon't know what is the malt extract
Malt extract are the sugars and proteins resulted after brewing.
&quot;Malt extract: Many home brewers enter into the hobby by making beers with malt extract. Malt extract is created through a process of mashing grain to make wort and then evaporating the water. The resulting extract can be added back to water later in order to create a new wort. <br>There are two main varieties of malt extract Dry Malt Extract (DME) and Liquid Malt Extract (LME).&quot; - HomeBrewTalk.com/wiki <br> <br>Malt extract is usually bought in cans(liquid) or bags (dry), and is often hopped (contains all the hops needed for the beer), which makes this the simplest method for the beginning brewer.
Get as much non-alcoholic beer as you can get your hands on, add some sugar and some yeast and let it ferment. Hey presto beer with alcohol in.
It might have preservatives in it or the alcohol may be boiled off...
Relocate!!!
<p>HARDLY from scratch! I brew MY beer from vege scraps and home made malt extract using kitchen pots and pans. YOURs requires a Homebrew store to get the brew stuff and equipment from!</p>
<p> if we want to make less quantity ( assuming we keep the ingredient analogy ) does the boiling remain the same</p>
Nice Instructable, good, clear pictures... However, I'm wondering why you don't add the sugar directly into the bottling (&quot;fermenting&quot;) bin, and then mix it with the beer just before bottling. Adding sugar to each bottle individually would explain your exploding bottles - as Charlie Papazian says in his &quot;The New Complete Joy of Home Brewing,&quot; from 1984: &quot;Adding an excessive amount of priming sugar [which is easy to do if you are spooning sugar into each bottle] will result in overcarbonation and the possibility of exploding bottles. The older method... adding 1/2-1 teaspoon of sugar to each bottle will result in inconsistent carbonation and bacterial contamination, which may result in excessive foaming.&quot; - The older method is what people tried here during Prohibition days, and lead to a lot of bottles becoming grenades. <br> <br>I'm thinking that not opening the fermenter every day will help with reducing contamination - an air lock is your inexpensive friend! <br> <br>I've never seen the yeast scooped out of the fermenter before, but it's not necessary - the old yeast will die and fall to the bottom of the barrel, and there may be billions of viable yeast cells still working away in the stuff you throw away. The yeast will &quot;clean up&quot; after itself, helping with clarity and flavor
Not really a problem to aerate your wort if you do it when the wort is cold, but I've moved away from splashing to avoid forming too much foam pre-fermentation and I've seen an improvement in head retention...<br> <br> I've been testing different methods and one that is working great is to siphon the beer and create an air pocket to expose wort to oxygen... this adds the oxygen without forming too much foam...<br> <br> <a href="http://brewbeeranddrinkit.com/top-3-reasons-to-aerate-your-wort/" rel="nofollow">http://brewbeeranddrinkit.com/top-3-reasons-to-aerate-your-wort/ </a><br> <br> Splashing from your mash tun to your kettle?... debatable... I am well aware of hot side aeration and personally I don't do it, but I also know that boiling removes oxygen from the wort hence why we aerate post boil... since you already do it, try adding a hose and see if you see an improvement and report :)<br> <br> As far as fining it depends on what you are trying to clear up on the beer... protein haze, polyphenol haze, etc.? Rather than just focusing on fixing haze at the end of the brewing process, look for ways to reduce haze during the brewing process... then look for finings to take care of the last little details...<br> <br> <a href="http://brewbeeranddrinkit.com/no-irish-moss-needed-for-clear-beer/" rel="nofollow">http://brewbeeranddrinkit.com/no-irish-moss-needed-for-clear-beer/ </a><br> <br> Cheers!
I'm looking for a metal electric Tun&mdash;any online sources? I've found some plastic ones and some metal pots (they require burners). <br> <br>Thanks! <br>
What I want to do is grow my own barley. Then malt that barley, and then make my own beer from that. I would also like to culture my own yeast from wild yeast but that might be to hard, (I know that it's not super easy to start a sour dough from wild yeast)<br><br>Peace Jeff
Hi, If you wish to grow your own barley, i am suggesting for organic barley which you can make organic beer.
Nice instructable i was thinking to make one myself for a while. I brew for more than 10 years now. I'm doing it a bit differently though. We have leased a room, that was a cheesemaking facility before. We have a walk in cooler and a sewer in the middle of the room. We brew in a more advanced manner, mainly because of our equipment and the batch size. (50l or 13 U.S. gal or 11 imperial gal) Pictures: Some of our malts, the big blue bin is pilsner, the smaller white ones contain munich, vienna, caramel, wheat, dark wheat...the brewery laptop, some of our fermenters. In the corner you see bottles conditioning. 2nd picture is our bottle washer, this device really rocks. 3rd picture is our "brew tower" heated by 3 x 10kw propane heaters. 4th picture is the cooling setup with counterflow chiller and pump. At the moment of the shot, it's recirculating sanitizing solution. (We use a product called "Shuredis" from diversey-lever. It doesn't smell like bleach or stain like iodophor and after a couple of 100 batches without infection, i'd say it's pretty much up to the job...)
Hi t. Rohner. I want to open a small scale brewery in Africa using the brewing kit like yours.Would you recommend for me what sort of kit I can buy?I am looking for one which can at least make minimum of 1000 bottles of beer/ day just to start with. You can contact me on my email chalizdekino@zambia.co.zm thanking you in advance dekino
Hello dekino We make 100 botles per brew day. Ok we could make 200 with a double batch. Our bottles are 500ml. I don't know what bottle size you talk about, but you can make the calculations. This is a completely different league. You need a 500-1000 litre brewery with lots of fermenters and conditioning tanks. This means some considerable heating and cooling efforts and at least some professional bottle filler. If you want to do this seriously, you will need some 500'000$ give or take. This won't work with a kit, you will need professional advice for this. www.brouwland.com sells the whole range from hobby to professional brewing accessories. Or here http://www.himfr.com/buy-brewhouse_equipment/ Or used http://www.usedcentral.net/usedbreweries/micro.htm I wish you good luck. Thomas
Moaner, It's a good instructable, very clear and well presented. But yours is a pretty clumsy way to make beer, seems to me. Get yourself a sealable fermentation barrel, or better yet two of them, and do it the easy way, is my advice. A couple of points: taking a gravity reading while the wort is still hot won't give you an accurate reading. Hydrometers are calibrated accurate at 15 degrees C. You can get conversion tables to calculate SGs at different temperatures, if you want one. I prefer to get the temperature down to what I intend to ferment it at, before I take a reading. I generally ferment at 22 degrees C., for an ale; 15 for a lager. A final SG of 1010 looks a bit high to me, for a brew that started at 1040. I would be looking for something closer to 1005. Was it fully fermented when you took that final reading? Two identical consecutive readings taken at 24 hour intervals is a reliable way to be sure fermentation is complete. Then give it another 24 hours, getting its temperature down to about ten degrees C. before bottling. Ordinary beer bottles will do, including twist-top ones. I've done well over a thousand, and never had one fail. Rather than leaving your wort to cool overnight you might consider running it through a wort chiller. A good counterflow chiller will cool it to room temperature in the fifteen minutes or so it takes to run it through. The sooner you can pitch your yeast and get fermentation up and running the sooner your wort will be safe from any ester producing elements that may be working their mischief in it. To whoever said sodium metabisulphite is not a steriliser — of course it is! Stick you head in a barrel full of the gas that solution generates as it evaporates, and it will kill you, along with any bugs that might be in there. Let it fully evaporate and you will have a sterile container, to be sure. You are right, the how-dare-you sayers wrong: aerating your wort won't do it any harm. Air is an enemy of fermented beer, not of unfermented wort. Many of us deliberately aerate our wort with filtered air through an aquarium air pump in order to raise its oxygen content. Yeast needs some oxygen to get started quickly, and thereby eliminate developing esters or infecting agents. A minimum 10 parts per million of dissolved oxygen is generally recommended. Recently boiled water or wort contains close to zero ppm DO. Pouring it vigourously from one container to another will help a bit, but not much. Exposure to the air is not good, insofar as the air may contain fungal spores and microbes; but all that messing around with it you do is more dangerous than pouring it from one container into another. I say keep it in a sealed fermenter, keeping it protected by a thick blanket of CO2. Personally, I pipe the CO2 from the airlock into a second fermenter; then after fermentation is 2/3 completed, rack the beer into that second fermenter, adding finings at the same time, and let it finish fermenting. Rather than ever opening it up and disturbing that protective CO2 cover, I syringe some out through the airlock hole to read its SG in a test jar. You need an eye-level view to get an accurate reading anyway. Geltatin won't do the beer any harm. It coagulates any solids it the beer, which then fall to the bottom as sediment. Isinglass is just another kind of gelatin. Any food-grade gelatin will do the job just as well.
Hi instructables. I want to open a small scale brewery in Africa using the brewing kit. Would you recommend for me what sort of kit I can buy?I am looking for one which can at least make upto 1000 bottles of beer/ day just to start with.
Hello all<br /> <br /> I wanted to share a very useful tip with you Instructabrewers.<br /> I heard and read about &quot;wet milling&quot; before, but i never thought it's so easy to do on a homebrew scale.<br /> In the last Zymurgy issue i read about it again, just before i went to brew.<br /> I told it to my brew-buddy and we decided to give it a try. In this article, they used a spray bottle to distribute the water evenly. Our spray bottle at the brewery has sanitizer in it, so i just sprinkled the water from a glass, while my buddy poured the malt from one bucket into another. Then we mixed it by hand and let it sit for 5 minutes, before we started to mill. We use a fixed gap JSP Maltmill.<br /> The grist came out with more husks intact, than with dry milling. The resulting grist also has more volume.<br /> The lautering went on wonderful, even with 70% wheat malt in the grist.<br /> We don't normally have problems with lautering. Except with high percentage wheat grists, or pumpkin and potatoe mashes.(Zombie brewing...)<br /> <br /> Give it a try, you will be amazed.<br /> <br /> Cheers Thomas<br />
I did this on my latest batch and after I did this the fermentation slowed. I am assuming this took the viable TOP fermenting yeast with it. I added some more cheaper yeast that I had on hand and fermentation started again, phew. I&nbsp;am not very happy because I&nbsp;invested in good yeast to improve the flavours and now my beer is brewing with el cheapo concentrate cap yeast.<br /> <br /> Do this and I'm sure you will remove some of the yeast which result in a higher FG and lower alcohol content.<br /> <br /> I will not be trying this again for the following reasons:<br /> <br /> 1) I don't think my previous attempts where I haven't done this have been excessively &quot;bitter&quot;.<br /> 2) I like really strong, hoppy and bitter beer, Indian Pale Ales in particular. Get hold of some Little Creatures Pale Ale for the ultimate Hopgasm.<br /> 3) I'm not trying to make a commercial style brew. I like my beer to have it's own gamey (Belgian) character.<br /> 4) I have found that with really bitter beers a bit of lagering makes the beer more mellow. Leave it for longer.<br /> 5) Refrigeration also hides bitterness and living in Western Australia I drink cold beer anyway.<br /> <br /> I think that this guy drinks his beer warm and weak.<br />
WTF are you doing? I don't see a hose on that Mash Tun leading down into the fermenter so that it doesn't aerate, add excessive oxygen, to the wart. You should know better when brewing from grain!!! Shame on you, and your telling other people to do this. Their beer will have a very offset flavor!!
PSI... That's exactly what I thought when I saw this... STOP IT!!! You're killing the beer!!! Where are the brewing police when you need them! Plus why are you using Gelatin in your beer??? Clarification? Yeah, your "Beer" will be clear, but it will be stripped of a lot of the flavor...

About This Instructable

285,490views

337favorites

License:

More by moaner70:How to Brew Beer 
Add instructable to: