Print PDF
Favorite
Email
Step 2Drill through the Threaded Nipple and Assemble
Use the punch to make a mark about 1/4 - 1/2 an inch from one end of the threaded nipple. Drill completely through.
Put one nut on the screw, then the threaded nipple, then the other screw. Use the pliers to tighten the two nuts. Try to center the threaded nipple on the screw.
Put one nut on the screw, then the threaded nipple, then the other screw. Use the pliers to tighten the two nuts. Try to center the threaded nipple on the screw.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
