Print PDF
Favorite
Email
Step 7Main Tabletops
Pre-drill holes and screw (2) F pieces into support pieces below. Both F pieces should be screwed in at the corners as shown.
The lower diagram shows that 2F requires a minimum of 3/4" area on support piece B for end support of 2F.
See plan in next step.
The lower diagram shows that 2F requires a minimum of 3/4" area on support piece B for end support of 2F.
See plan in next step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
