Print PDF
Favorite
Email
Step 10Glue
Apply glue to the all surfaces: the inside of the cut-out and the biscuit itself. The biscuit will fit quite loosely in the slot, so you'll need to apply more glue as you go. The liquid in the glue will cause the biscuit to swell and fill the slot, so feed in more as necessary.
Try not to smear it all over the good bits of wood, as you'll have to sand it off later.
Try not to smear it all over the good bits of wood, as you'll have to sand it off later.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
