Instructables

How to Build a Robot - The BeetleBot v2 ( Revisited )

FeaturedContest WinnerContest Winner

Step 11: The BeetleBot v2 ( Revisited ) - The third connection ( part 1 )

Picture of The BeetleBot v2 ( Revisited ) - The third connection ( part 1 )
beetle_robot_v2_2007_MAKE_ 073.jpg
You are going to solder a wire between the motors.
 
Remove these adsRemove these ads by Signing Up
SteeleWorks3 years ago
ive got the same switch as niconoro and im wondering if for the switches you used did you solder the connection that always has electricity flowing through it
niconoro3 years ago
hey i couldnt find that kind of swich but i found this one.
280-1048 Snap Action Switch w-Roll Lev SPDT.gif
You could find the Switch. Just go to any near tv vcr and dvd repairing shop and ask them for SPDT Switch with a metal lever they will lend you 2 for 1$.
Dose the wire have to be thick because i hav a fin one from my xbox controller that work fine with my motors