Instructables

How to Build a Tripod Head for $10 that is Panoramic

Featured
Picture of How to Build a Tripod Head for $10 that is Panoramic
Stitching software and digital cameras make panoramic photos far easier than ever before. However, to get the best results, you need a special tripod head. These can cost hundreds of dollars, but making your own isn't that hard. Even better, it's dirt cheap.

There's some amazing software out there for panoramic photography. Various software packages warp, stitch and blend sequences of photos so that they (ideally) look like one big, high-resolution, panoramic shot. However, getting these shots to turn out perfectly isn't easy when handholding your camera or using a normal tripod, especially when some parts of the image are fairly close to the lens.


The issue is "parallax", or, to rip something out of the American Heritage dictionary since I'm not about to try to explain it myself, "an apparent change in the direction of an object, caused by a change in observational position that provides a new line of sight." To fix this, you need to get the camera to rotate about a specific point that is forward of the screw socket in your camera.


Panoramic heads can be very expensive in the $300 to $500 range for "name brand" heads. Several designs for closer to $100 are available on the web, but look a tad on the flimsy side.


Building your own panoramic head for an SLR isn't too hard or expensive. The parts for the design shown here cost about $10. Every part here is available at a store like Home Depot.


Once you get past some of the misinformation out there, the only really hard part is figuring out the dimensions. The downside is that the mount is only useful for a specific camera/lens combo. On the other hand, you can't mistakenly mess up one of the critical adjustments once you've built it, and the homemade mount is as light as a couple small pieces of wood.


My woodworking skills aren't top-notch, but there's really not much need to make it look even this nice. Don't worry about appearance, just get the key measurements close and you'll have a fully functional new toy.
 
Remove these adsRemove these ads by Signing Up
rahmansaid4 years ago
Is there any reason why the arm should move arm and down. Can't I make it fixed and straight?

The reason for the arm being moveable is so that you can tilt it to make spherical panoramas, if it was fixed at a right-angle you would only be able to make cylindrical panoramas.
cateddy3 years ago
Lamin. One thing I would do if I were to make on of the mounts is this; The round circle mount I would drill 12 holes are so that I could insert a pin so that all my pictures would come out with the same spacing. Some people may want more or less holes. I use a tripod and it has the angle thing on it and it is hard to get it to the right angle. I use 12 pictures and sometimes 24 when I mount the camera on the side. Chuck
pitty5 years ago
To be nice I have seen this Head some ware before. So I assume you are one of the authors from this site. http://www.wikihow.com/Build-a-Panoramic-Tripod-Head
laminterious (author)  pitty5 years ago
Obviously, that article was just an inspiration.
That is odd... maybe some credits or picture permissions would be nice...
tomedav5 years ago
I built by own pano jig from 80/20 aluminum parts:
http://www.8020.net/

I eventually exceeded it's capablities and have a commercial jig on order.

Tip: You don't need a pano head for most landscapes.

Tip: You can't take indoor panos (especially 360 VR) without one.

If you subject is far away the parallax error is easily compensated for when you stitch the photos.

If your subject is close and has lots of straight (especially vertical) lines the pano rig turns impossible into slightly challenging.
laminterious (author)  tomedav5 years ago
Thats interesting.. would love to see a pic of the one that you made.
Phil B5 years ago
Very interesting and very helpful.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!