How to Build a Workbench/Storage Shelf

Step 2 The Parts and Tools

Part of this project was an experiment. One of the things we've constantly been told is that the cost of the pipe often makes the project very expensive. Well, with this project we decide to see if we could cheapen it up a bit. We were successful! We found that top rail fence post that you can buy from Home Depot works just fine with our size 6 fittings.

Raw Materials (got from Home Depot)
Qty | Description
1 | 4x8 Sheet of Plywood.
3 | 10.5 foot pcs of top rail fence post (1-3/8")
10 | Screws (with washers)

Kee Klamp fittings (got from http://www.simplifiedbuilding.com)
Qty | Description | URL
4 | 20-6 Side Outlet Elbow 1" | http://www.simplifiedbuilding.com/product_info.php?products_id=111
8 | MH50-6 Swivel Member | http://www.simplifiedbuilding.com/product_info.php?products_id=210
4 | 61-6 Flange 1" | http://www.simplifiedbuilding.com/product_info.php?products_id=258
2 | 105-6 Sheeting Clips | http://www.simplifiedbuilding.com/product_info.php?products_id=376

Tools
1 | Allen Wrench (for Kee Klamp fittings)
1 | Tape Measure
1 | Pipe Cutter
1 | Latex grip glove (for holding pipe while cutting.. very handy)