How to Build an Airsoft / Paintball Gun

Step 2 Build airsystem

I used a small 200 psi aircompressor mounted to the bottom of the hand guard. that is connected via 1/4 high pressure tubing to a vacumme solenoid valve. The length of tube acts as an air tank. the solenoid valve is flipped backwards and the wires are run to a push button switch ive mounted on the trigger. the pushbutton switch is connected to a modified kodak disposable camera. This provides the 200 volts required to open the valve because im using 10 times the pressure its designed for.

Comments

[garagegenius]

whats with the 200 volts aqnd how did u get it

[ien.nimbus]

Yes, where can we get that small compressor?

[edwin81]

Hi, where do u get da small air compressor?