Introduction: How to Control I2C Oled Display With Arduino

This Is A Very Simple Tutorial Of How to Control I2C Oled Display With Arduino

If You Like This Instructable Please Subscribe To My Channel

https://www.youtube.com/ZenoModiff


Step 1: Parts .......

Picture of Parts .......

* ARDUINO UNO

* I2C OLED DISPLAY

* MALE - FEMALE JUMPERS

Step 2: Wiring.........

Picture of Wiring.........

Connect The Jumpers To The I2C Oled Display ...

Step 3:

Picture of

Connect I2C Oled Dispaly To Arduino

* VCC - VCC

* GND - GND

* SCL - A5

* SDA - A4

Refer Schematics

Step 4:

Picture of

Wiring Has Done ;)

Step 5: Software Part ..........

Picture of Software Part ..........

Download The I2C Scanner From Here :--http://www.mediafire.com/file/d6xu6gb4lqy00x4/I2C_...

Step 6:

Picture of

This Is My I2C Address Your Will Be Different

I Have Done This To Make You Know About Your I2C Address

Now We Dont Need This ...

Step 7:

Picture of

Open Arduino Ide & Include This Library :-- http://www.rinkydinkelectronics.com/library.php?id...

Check This Instructable If You Are Not Familier With This :--

https://www.instructables.com/id/How-to-Add-Arduin...

And Open The Sketch Then Upload It By Checking The Correct Com Port & Board Name


Step 8: Schematics ...

Picture of Schematics ...

Step 9: More Info ........

Comments

AlinG14 made it! (author)2018-01-02

If you want to make you own images you need to use LCDAssistant to make the hexadecimal code.

About This Instructable

823views

26favorites

License:

Bio: Teaching is a very noble profession that shapes the character, caliber, and future of an individual. If the people remember me as a good teacher ... More »
More by SreeR18:How to Control I2C Oled Display With Arduino How to Make a Stopwatch Using ArduinoHow to Make a Circuit Using Fritzing
Add instructable to: