How to Create a MIDI Map for the BCD3000 in Traktor Pro

Step 5 Modifiers

A Modify key is like holding Shift. You can then double or more every control.

1.Click Add and select Modifier then Modifier #1
2.Learn the button
3.Select Set to Value to 1
4.I find Interaction Mode is best set to Hold
5.If you want to permanent switch (toggle) a Modifier you have to set Interaction Mode to Direct.
In addition you must duplicate your Modifier-Button to toggle (off) the Modifier.
ex:
-Modifier #1, Interaction Mode: Direct, Type: Button, M1=0, Set to value: 1
-Modifier #1, Interaction Mode: Direct, Type: Button, M1=1, Set to value: 0
6.When the control is to be to be modified or shifted, learn it and assign it, and set the Modifier to M1 and the Value to 1
7.When you press the key alone, make sure you change the Modifier to M1 and Value 0

Note: LED buttons can only respond to one command. Modifiers will not alter the LED light unless set to.

Reference:
(Traktor Manual, section 15.1.2)

Comments

[Exiumind]

Hi, what about mapping a bcf2000 instead (Traktor 3)?