With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Here's how to field strip (take apart) a Ruger 10/22 rifle for cleaning. Here are the few tools you'll need: Flat screwdriver Small thin screwdriver or a punch ...
Take off all accessories (scopes, sights, etc). Remove the magazine, open the bolt, and ensure there are no rounds in the chamber.
Push your safety so that there is an equal amount showing on both sides. If you don't do this, the button will get stuck on the stock as ...
Depending on your rifle, the pins may just fall out on their own, or they may need some help. If they don't come out easily, gently use the ...
Take the trigger assembly out and put it aside.
Pull the bolt handle back and lift up on the front of the bolt, and it should just come right out. Remove the spring as well.
This is as far as you need to go to clean the rifle. If you want to, you can remove the barrel by using a hex key to ...
Put the bolt spring back in. Using your hand and a screwdriver, pull the bolt handle back all the way. Take the bolt and push it into the ...
Put the trigger assembly so the holes line up and insert the pins. If the pins don't want to go in, gently tap them with a hammer.
Make sure the safety button has equal amounts showing on either side and lower the stock onto the receiver. Tighten the take-down screw and barrel band. Replace accessories, ...
How To Dis/Reassemble the Ruger 10/22 Trigger assemblyby eat_squids
Ruger 10/22 Modby god.favored
Stevens Model 62 .22 bugout gunby andyup1
How to Clean a Ruger Red Label Shotgunby kboeckholt
Cleaning a Rifleby gdl_lvb
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.