With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This will show you how to fix the pins on the USB port of a flash drive.
You'll want to disassemble the flash drive with a small precision screwdriver. Gently prying at the seams of the casing until the circuit board is ex...
Most of the tools should be available almost within hands reach. Tools -Soldering Iron -Solder -Small Precision Screwdriver (Flathead) -Reading Glass...
Dedsolder the points that need to be replaced.
At this point, your leads should be desoldered and ready to be attached. Take the soldering iron and solder away. Make sure that you have some way o...
Reattach the two halves of plastic that you pried off in step 2; making sure that you don't wiggle the circuit board during reassembly. Then wrap the...
Make sure that you test the drive after reassembly. You want to check for any shorts. If there are any, disassemble the drive and find the shorts re...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »