Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here's how to hack your Eagle award. Some people might want to do this to show support for a change in policies within the Boy Scouts of America.
Cut your ribbon. I ordered some 35mm grosgrain ribbon. Measuring ribbon in the US is usually English measure, so I ordered 35mm ribbon from an ebay su...
Gently fold, without crimping, the rainbow ribbon in half. Stitch it by hand or with a machine. I used red thread, as that's the standard thread used ...
Flip the ribbon inside out.
On this medal, the top bar of the medal had a cut in it, which I was surprised to find. I bent it slightly so that I could slide the ribbon back into ...
Bend the metal that's now in the ribbon back into a straight position. Make it meet up like it did before. Be careful not to bend it too far. It's sof...
The ribbon needs to be stitched together on the sides to avoid the ribbon from sliding around. If you don't stitch it, it'll fall and slide and make a...
Insert the ring back into the bottom of the ribbon. Push the middle of the ribbon (yellow and green) out toward the front to make it lay right. Make s...
Attach the Eagle back onto the ring. Bend the ring back together to close it off. It wasn't soldered at all, just bent into place to begin with. That...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »