Instructables

How to Install Drip Irrigation

Featured

Step 3: Lay Out the Tubing

Picture of Lay Out the Tubing

Attach a length of unperforated tubing or garden hose to the hose bib, long enough to reach from the bib to the plant beds.

Using barbed connectors, attach the roll of ½-inch tubing with emitters to the unperforated tubing at the edge of the plant bed.

MORE: Water-Saving Yard & Garden Gear

Snake the tubing with emitters around the plants, near their roots. Keep the lines of tubing about 12 inches apart.

Fan TOH on Facebook
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!