Print PDF
Favorite
Email
Step 13Assemble
Mount the UPCB into the mounting nuts with the #4 size bolts. Connect the output ribbon connector, the stick connector, and the button connector to the UPCB. If you're using a programming button or extra play buttons, attach them as well. Clean up any slack from the wires with zip ties for a nice clean finish.
Place the top control panel in place, and secure with the original carriage bolts. Turn the stick upside down, and secure the slide switches in place with the two original screws. Place the bottom metal plate, and secure with the original 8 screws.
Congratulations, you're done.
Place the top control panel in place, and secure with the original carriage bolts. Turn the stick upside down, and secure the slide switches in place with the two original screws. Place the bottom metal plate, and secure with the original 8 screws.
Congratulations, you're done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
