And then I'll tell you how to make a thousand.
(And it's really easier than you'd think.) (:
(1,016 are in the picture below.)
Remove these ads by
Signing UpStep 1: Making a square
pictures:
1. Start with your (rectangular) sheet.
2. This is where your fold will be.
3. Fold the top edge to the side edge; make sure you crease well.
4. Cut off the excess.












































Visit Our Store »
Go Pro Today »




http://www.instructables.com/id/Origami-Heron-with-flapping-wings/
Cool! I made 1000 too! It's in my video, now i'm just sewing them together. Although, it only took me 2 months to finish 1000 and I only spent like 30 mins a day... Anyway, here's my video:
But the only 'fault' i find that people do when they makes cranes is in step 5. A lot of people fold only the corner in, instead of the corner along with the side. That causes the wings to be really square/rectangle shaped and the neck to be kinda lumpy.
what step is yours different from how i was making mine?
the only thing i can tell you is to look at the picture and also make sure that you are following the creases... However, when bringing the top flap up, you will have to invert part of the crease while folding it up.
but i can't show a picture of that, unfortunately.
but try it again, and if you are still having problems, let me know, and i will post a video explaining this step more thoroughly and better visually, okay?
i dont get which part is the top bottom or end... and i just ripped my paper trying to figure it out. =(