loading
Picture of How to Make 6-Pointed Paper Snowflakes
This step by step guide will teach you how to make SIX pointed paper snowflakes. Most people make (and most how-tos teach) snowflakes with four or eight points. Real snowflakes in nature form with six points (or occasionally three if they formed weird) so I choose to make my own with six points. I taught myself this technique in high school and have been making paper snowflakes around Christmas time ever since.

All you will need for this is paper and scissors. Some people like to use fancy paper, but I use plain white copy paper because somehow the simplicity of white is more beautiful to me.

If you want to view a gallery of my snowflakes, see me on Flickr: Paper Snowflake Gallery.

Remember to rate this Instructable!

Step 1: Step 1

Picture of Step 1
First, begin with a square piece of copy paper. I usually make two snowflakes for every 8.5"x11" piece of paper, so I first cut the paper in half, and then make a square from each half. This makes a snowflake about 5" across. If you're just learning to make snowflakes, using a full piece of paper for each snowflake may be easier to practice with.

You can make a square from a rectangular piece of paper simply by folding one corner down to form an isosceles triangle (like the one in the next step) and trimming off the excess paper.

 
1-40 of 247Next »
cartonus17 hours ago

simle and cute

Tomorrow151 month ago

Hi Tomorrow 15 I will be showing my grand daughter tomorrow she love art I have been helping her with darwing

Your instructable brings so much memories!

elliotnash1 month ago

These slowflakes look really good. I guess you can say they're for the advanced paper crafters.

seirvine2 months ago

Was looking for some ideas for the grandchildren to decorate our cabin at family camp this week. They will love making snowflakes in summer.

ekelkar2 months ago

Thanks for this Instructable. Making these snowflakes helped my figure out how to tie-dye a snowflake bandana.

http://www.instructables.com/id/LDC-Arctic-Adventu...

suzysmith244 months ago
Makes me laugh 2 see mine
1428834126898-688106574.jpg
cutiepie115 months ago

these are hard my friend know how to make them

leelee.susie6 months ago

how is everyone getting a square from the copy paper mine keeps coming up with rectangle and so i cant make a triangle and my daughters frozen bday is tomorrow im having such bad luck i guess im being dumb from lack of sleep lol

ReadsInTrees (author)  leelee.susie6 months ago
Fold one corner of the paper all the way down to one side. Like, if you're holding the paper upright (like you're reading a letter), fold the upper left hand corner all the way down so that it touches the right side of the paper. The edge of the paper that used to be at the top going horizontally should line up evenly with the right hand vertical side of the paper. What you'll have is a large triangle with a narrow piece of rectangular paper along the bottom. Cut off that rectangle, and you'll have a square already folded into the first triangle.
LiamR27 months ago

Mine was cut into two pieces... I Guess I'll have to retry.

So these instructions are Awesome!!! Thank you!!!
I'm doing a Frozen theme for my daughters 1st birthday
Going to find some glittery blue craft paper today (hopefully) and do some more to hang up on a white tablecloth.
There is a Frozen PDF on Google with Frozen theme templates, going to give them a go next, but they cut the bottom straight.. So that might be different :)
Thanks again!! Great instructions :)
image.jpgimage.jpgimage.jpgimage.jpgimage.jpgimage.jpg
kaylah19 months ago

hellllppppp!!!! at number 6 step i end up cutting the snowflake in half! what am i doing wrong?????

your cutting the middle part be sure to start cutting a little at first until you get the hang of it then u can get a little more creative with it once you can kind of see which side goes to what hope this helps

NancyG3 kaylah18 months ago

Kaylah1, I'm not sure what is happening to you. But maybe this will help. Think of each fold as the radius/spoke of the snowflake. The point of the triangle is the center. The end with the 2 "bunny ears" is the outside edge. You may want to skip step 4C (I don't see a step labeled 6) and see if that helps.

I might also recommend making a partial cut then unfolding your snowflake and see what the effect is. Then refold. It might help you map the whole process into you head.

Hang in there. This particular project was simple for me. But I have struggled with this type of thing in the past. Typically it's a matter of one simple step that I just didn't get at first. Then once I got it - BAM! Don't give up.

ReadsInTrees (author)  NancyG38 months ago
Step 6 and beyond is on the next page (hit the orange button at the bottom). Instructables wants to split up the steps into pages.
nwaordu kaylah19 months ago

did you figure out what you was doing wrong because i'm in your boat

amyabrigo nwaordu8 months ago

You're skipping step 3. (Folding the triangle over into another trangle a 2nd time)

I was doing the same thing. Turns out I was folding it one too many times.
amyabrigo kaylah18 months ago

I did this. You're skipping step 3.

wendys1 kaylah18 months ago

haha omg thats funny

ReadsInTrees (author)  kaylah19 months ago
You may be cutting too low? This is a step where you do chop off a big chunk, but only the top. If you folded correctly to this point, you'll see that the top of the snowflake has those two paper corners making a V shape at the top. You'll be cutting those off. We need to even out the layers of folds so that everything is symmetrical, and by making the cut at an angle, that makes the final points of the snowflake.
NancyG38 months ago

Simple and easy. Great instructions. One additional hint - sharp scissors make this easier. Smaller scissors will give you more control over intricate details.

LarryJ18 months ago

I made a few of these to use as name tags on gifts, adds a personal touch I think. Thank you I forgot how to do these.

Anna CG8 months ago

YAY!! MERRY CHRISTMAS!!!

Amazing...my snowflake is amazing

MaitreyiS made it!8 months ago

This is really useful

FS83P0VG1QVZ35E.MEDIUM.jpg
zakra8 months ago

Daniela made it

IraP9 months ago

I did it today!

IMG_20141129_211106.jpg
ReadsInTrees (author)  IraP8 months ago
Those look great!
dsantil71 IraP8 months ago
WOW!!! Can I hire u to make me some, lol
ReadsInTrees (author)  IraP9 months ago
Nice!
Fightwinconquer made it!8 months ago

Yaaay. Thanks for posting!

IMG_20141218_181622500.jpg
KatrinaC28 months ago

my snowflake came out in a reactangle shape

ReadsInTrees (author)  KatrinaC28 months ago
Give it another go, and try to follow the steps very carefully so that you don't miss any folds.

I love making snowflakes and this is the best way!!! (I would put a picture but I've got an old iPad so I can't take pics) :(

JaNieceW8 months ago

Very easy seemed as if it would be hard bu turns out to be fine! i made it i just did not have a photo

MattN3 made it!8 months ago

here's what I made

image.jpg
ReadsInTrees (author)  MattN38 months ago

Hmm, looks like you skipped a few steps of my tutorial. :)

MattN3 made it!8 months ago

here's what I made

image.jpg
1-40 of 247Next »