Open the tail. Fold about 1/3 of it down. Fold down the two corners down. Fold it down again (So the tail looks more sharper). Fold down the two sides...
If you play StarCraft or WarCraft DoTA (Defence of the Ancients), you will recognize this creature. In Starcraft this creature called Zerg Hydralisk, a predator and carnivorous alien creature. In WarCraft DoTA, this creature's name is Lesale Deathbringer or best known as the Venomancer, which is very expert on venom and poisons. Now I've created it's origami model.
Step 1: : Materials
The material for this project is just a sheet of paper. Size of the paper doesn't matter. I suggest 150 150 mm. Use brown-colored papers, you can also use orange-colored papers but light brown's the best.
Step 2: : Basic Steps
First, fold the paper half. Then fold it half again. Open model. Fold down 1/4 of the paper. Unfold. Then Fold down 1/8 of the paper. Fold down the side layers to the center of the line. Pull the point of the paper, then squash fold.
Step 3: : Head's Down!
Fold up the preliminary base. So it is looks like a half-finished bird base. Fold down. Sink fold the tip of it (just a bit, not much). Fold it up again. Fold down the tip of it again. The fold the side to the center line (so it's looks like a kite). Fold down the 'head' exactly as the line that's created by the two folded sides. Open the two sides, keep the 'head' folded down.
Step 4: : Forming the Neck
Fold the sides to the center just like when you're making the head. Pull the point and squash fold. Then fold up (just like the head). Now gently, pull the jaw down ( Pull it until it cannot be pulled anymore). Fold it to form the jaw. Fold down the head.
Step 5: : Hardest Part : Claws
Valley fold the left side. then fold down half of it. Reverse mountain fold it. Then fold up the arm, fold down the layer down. Fold down the arm. Open the upper layer. 'Insert' the tip layer into it. Repeat on the other side.