Instructables

How to Make An Asari Latex Headpiece.

Featured

Step 3: Making an Armature (Using the Head Mold)

Picture of Making an Armature (Using the Head Mold)
page6.jpg

Click on the pictures (on the little 'i' in the top left corner) to get to a bigger image, so you can read the full instructions within the comic!




Ultra Cal 30 for the win.

For my head, I used about 6.53 kilograms of Ultra Cal, so for water we used 2.5 liters.

 
Remove these adsRemove these ads by Signing Up