Introduction: How to Make Diving Goggles Fabric Strap

Picture of How to Make Diving Goggles Fabric Strap

Diving goggles usually have rubber strap which causes pulling of your hair while wearing and removing goggles which may lead to hairfall. In order to solve this problem I came up with this simple instructable in which you'll make a fabric strap for your goggles.

Step 1: Materials

Picture of Materials

You'll need

1-Old swimming trunk

2-scissors

3-materials required for stitching(needle and thread)

Step 2: Cutting the Cloth

Picture of Cutting the Cloth

Take your old swimming trunk and cut the required piece of cloth measuring the width of the strap(at the centre)

Step 3: Stitching

Picture of Stitching

Stitch both the sides end to end leaving the narrow side open for straps to enter.

Step 4: Done!!

Picture of Done!!

Pass the strap through the fabric as shown in the picture and your fabric strap diving goggles are ready.

Comments

JulianAzz (author)2016-06-28

Great work. This looks good and will help making the srap more comfortabl, amaizing!

VGR101 (author)JulianAzz2016-06-29

Thank you

About This Instructable

954views

12favorites

License:

More by VGR101:How to make diving goggles fabric strapGUITAR WALL HANGER
Add instructable to: