Print PDF
Favorite
Email
Step 11Draw border/guidelines
1. Start by drawing a rectangle 25mm wide and Xmm high, where X equals twice the height of your characters graphic plus 35mm. See image below.
Therefore an image of 25mm in height needs a rectangle of [(2 x 25mm) + 35mm] which equals 85mm.
2. Now draw two lines across the width of the box about 12mm - 13mm away from the inside edge of the rectangle. These are the fold-out tabs which will become the miniatures base. See image below.
3. Draw a third line across the middle of the box making sure that it sits across the exact center of the rectangle. This forms the guideline where the fold will go. See image below.
4. Move your colour image into the middle of the box underneath the central line and the silhouette into the box above the dividing line. See below.
5. The final stage of preparation is to add titles to the fold-out tabs located at the top and bottom of the rectangle.
Therefore an image of 25mm in height needs a rectangle of [(2 x 25mm) + 35mm] which equals 85mm.
2. Now draw two lines across the width of the box about 12mm - 13mm away from the inside edge of the rectangle. These are the fold-out tabs which will become the miniatures base. See image below.
3. Draw a third line across the middle of the box making sure that it sits across the exact center of the rectangle. This forms the guideline where the fold will go. See image below.
4. Move your colour image into the middle of the box underneath the central line and the silhouette into the box above the dividing line. See below.
5. The final stage of preparation is to add titles to the fold-out tabs located at the top and bottom of the rectangle.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
