loading
Picture of How to Make Paper Speakers From Scratch
 
How to Make paper Speakers From Scratch

This is a speaker i made from scratch useing scraps i found around my home. The goal of this project was to make a speaker for free out of scrap. The other thing was that i did not use a pre made speaker to make this.

I will show how to make it, so you can build your own :)

Heres a video of the sound of my speaker.

https://www.youtube.com/watch?v=iAmdezxojSg

 
Remove these adsRemove these ads by Signing Up

Step 1: Parts and Tools

Picture of Parts and Tools
1354401347586.jpg
1354401403328.jpg
Tools

soldering iron
solder
scissors

Parts

construction paper
card board
card board tube
audio jack
wire
coated copper magnet wire (This must be atleast 8 ohms to protect your devices)
tape
magnet
PAPER cup
paperclip

Step 2: Make the Speaker

Picture of Make the Speaker
Make a copper wire coil a little bit bigger than the diameter of your magnet.
Place the wire in the center of the bottom of the cup.

Step 3: Make the Speaker 2

Picture of Make the Speaker 2
1354402286817.jpg
Now build a bracket to hold the magnet. The magnet must be placed in the center of the wire coil.

To make the bracket make the paper clip straight. Then tale it io a peice of card board. Then flip it over and tape the magnet on the back side of the bracket.

Make shure you tape secureley because this part must resist the vibrations from the magnetisim when the speaker is on.

Step 4: Make the Speaker 3

Picture of Make the Speaker 3
1354402469674.jpg
1354402490438.jpg
Now tape the bracket to the bottom of the cup. Make shure the magnet is placed in the center of the coil.
Also make shure to secureley tape this on.

You now have a bare speaker with no way to connect to the music player.

Step 5: Make a Case

Picture of Make a Case
1354402782350.jpg
1354402894721.jpg
1354402919244.jpg
Now you have a ugly cup with card board on it. Now make it look a little better by adding a case! Because this is supposed to be a paper speaker i made the case out of cardboard and paper.

First make a front plate out of card board.
Trace the diameter of the top of the cup on to a peice of cardboard and then cut it out.

Step 6: Make a Case 2

Picture of Make a Case 2
Now make a support to make the cup level.
Made out of a card board tube and taped to the cup.

Step 7: Make a Case 3

Picture of Make a Case 3
1354403429242.jpg
Make a bottom panel.
Make shure you leave some room in the back for the wires.

Step 8: Make a Case 4

Picture of Make a Case 4
1354403748617.jpg
1354403816264.jpg
Now make a back pannel. Tape it so it will open like a door. Also cut a hole so the audio jack wires can come out.

Step 9: Solder Time

Picture of Solder Time
1354405349946.jpg
1354405363702.jpg
1354405481706.jpg

Solder the 2 coil wires to the audio jack wires. It does not matter which way they are connected.

Step 10: Make a Cover

Picture of Make a Cover
1354406789713.jpg
1354407127351.jpg
1354413787076.jpg
1354415267653.jpg
Now cover the card board with paper so it would look nice.

Step 11: Enjoy Your Speaker

Picture of Enjoy Your Speaker
The speaker may require some fine tuneing of the coil to get some sound out of it. The volume of it will come from the streingth of the magnet and the coil.

The speaker quality is pretty good considering that its made of paper and hand made.

If all works well, Enjoy your speakers!!!
artcfartc2 years ago
That's pretty awesome! When my neighbor told me he couldn't have hardcover books in prison because people would make speakers out of them, I thought he was pulling my leg. After seeing this, I guess it is possible.