Introduction: How to Make Sky Hawk

Picture of How to Make Sky Hawk

Sky Hawk is a plane that has ability to balance itself and not to be stal.

With this Instructable you eill learn to how to make Sky Hawk

Step 1: Tools and Materials

Picture of Tools and Materials

Step 2: Folding

Picture of Folding

Fold the 1/3 of the paper.

Step 3: Folding

Picture of Folding

Fold the paper to half.The last fold must face outside.

Step 4: Folding and Taping

Picture of Folding and Taping

Fold the top left cornor to the corner of the last fold you made.Repeat at the other side.Tape them together

Step 5: Folding Wings

Picture of Folding Wings

Fold the wings as shown in the pictures

Step 6: Cutting

Picture of Cutting

Step 7: Folding the Tail

Picture of Folding the Tail

Get the tail to its position by pushing it up

Step 8: Folding the Tip

Picture of Folding the Tip

Open all foldings and fold the tip of the plane inwards

Step 9: Gluing

Picture of Gluing

Glue the underside of the tail and inside of the body of the plane.

Step 10: Cutting

Picture of Cutting

Cut the plane like in the images

Step 11: Taping

Picture of Taping

Tape the top of the plane

Step 12: Taping

Picture of Taping

Roll the tape two or three times to make the nose of the plane stronger

Step 13: Throwing

Picture of Throwing

To throw the Sky Hawk hold the nose with your thumb and middle finger and place  your index finger to the "rudder" of the plane
Throw it like throwing a ball, fast and straight.


About This Instructable




Bio: I love legos, cats, sewing, star wars and paper airplanes
More by Darth Nihilus:How to Make Sky HawkHow to Make a Origami PenguinHow to Make a Gyro-Plane
Add instructable to: