Introduction: How to Make Tattoo Machine at Home - Homemade Tattoo Machine
Hi guys, welcome to my new project : Tattoo Machine. In this article, I will show you How to Make Tattoo Machine At Home
If you want a more visual instruction please click to this below instructional video.
If you like, SUBSCRIBE my Youtube channel ☞☞☞ HERE ☜☜☜. I always update my new projects everyday
Step 1: Tools You Need
1. DC Motor
3. Glue Gun
5. Black Tape
8. Single steel
Step 2: Insert Needle Into Pen
Now insert needle into pen and in the back side of the needle inflect it as like picture.
Step 3: Attached Small Steel
Now attached a small steel with pen using glue gun, see the picture.
Step 4: Add Pinium With Dc Motor
Now Add pinium with dc motor and make a small hole in the pinium to attached needle. See the picture
Step 5: Attached Needle With Pinium
Now attached needle with pinium where u make a small hole as like picture.
Step 6: Attached Dc Motor With Steel
Now attached dc motor with steel which is already attached with pen. See the picture.
Step 7: Add Black Tape
Now add black tape with dc motor and steel also pen and steel.
Step 8: Attached Battery With Pen
Now Attached battery with pen using glue gun.
Step 9: Attached Dc Motor, Switch and Battery Cable
Now Attached Dc Motor, switch and battery cable.
Step 10: Connect With Battery and Add Switch
Now Connect with battery and add switch into top of the battery using glue gun. see the picture.
Step 11: Now Tattoo Machine Is Ready to Use
Now Tattoo Machine is ready to Use And create tattoo. Like and Share this with your friends.
I hope you like this article. If you confuse any of the steps you can watch full video into my video here:
Thank you for reading my instruction and watching my video.
See you in the next project. Click Here To Subscribe My YouTube Channel for more Video.
We have a be nice policy.
Please be positive and constructive.