Picture of How To Make The Super Omniwing Paper Airplane

The Super Omniwing is a fast, stealthy long range flying wing.

This airplane is one of my more advanced designs developed from another person (menamiketrx on Youtube)'s design.

TAA USAF Designation: F3-1V
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
1 sheet of 8.5 by 11 inch paper (A4)

Step 2: Start

Picture of Start
Instructables 2 023.jpg

First, take your paper and align and fold it "hamburger"-style.

Then fold it into fourths.

Step 3: The Corners

Picture of The Corners
Instructables 2 026.jpg
Instructables 2 027.jpg
Instructables 2 028.jpg
Fold the corners in.

Then fold them into the center.

Now fold the top down.

Fold into the center again.

Step 4: Time To Cut

Picture of Time To Cut
Instructables 2 030.jpg
Instructables 2 031.jpg
Instructables 2 032.jpg
Fold the Super Omniwing in half.

Then cut a triangle 2.25 in. by 2.25 in from the rear of the aircraft. Do NOT throw this away.
After that, cut fins along the wing edges.

Step 5: Unfold

Picture of Unfold

Unfold the shape so it spans it's entire wingspan.

Now tape the front folds down.

Step 6: Counterweight Folding

Picture of Counterweight Folding
Instructables 2 038.jpg
Instructables 2 039.jpg
Instructables 2 040.jpg

Fold the triangle into itself as pictured then down.

Step 7: Apply

Picture of Apply

Tape the triange to the bottom front of the Super Omniwing.

Step 8: Flight

Picture of Flight
Now you're ready to fly.
heavyfire884 years ago
Lol... It is really EPIC ! NEAT 5PTS. :D
i must have done this wrong...mine goes straight down, and I've made the the omni-wing delta so i thought this wouldn't be a problem
ol9879864 years ago
sweet 5 star :)
legoman1114 years ago
i made a new desing based off this paper airplane
OrigamiAirEnforcer (author)  legoman1114 years ago
Great! Can you post a picture?
uh...now now but i will try to post it as soon as possible.
tonyrider4 years ago
How do u fly it
and will i tape the front of the extra triangle with the plane
OrigamiAirEnforcer (author)  tonyrider4 years ago
Well, to fly it you mustn't throw it like a dart. It will not fly correctly or perhaps at all. The Super Omniwing's "flying wing" configuration requires it be pitched down, and pushed forward at a moderate speed. Then release it. Although a different airplane, the OmniDelta's launch procedure is the same (see the picture below). And yes, the triangle that you've cut off the trailing edge of the plane should be folded up as pictured on Step 6 and then applied to the nose as a counterweight. Good luck!  
OmniDelta Construction 017.jpg
Do you mean 2 and 1/4 inches?
FrozenIce5 years ago
 were on earth is a bottom front
OrigamiAirEnforcer (author)  FrozenIce5 years ago
The bottom front would be the bottom of the front of the aircraft. I've put a box around this area to clarify. 
irabangb2 years ago
origamiairenforcer- I am trying to make a paper plane that will be able to fly for a long time. a little help?
If anyone would love to see my flying wing just let me know it's a monster. i can throw my flying wing 100ft or more in the air