How To Make The Super Omniwing Paper Airplane

The Super Omniwing is a fast, stealthy long range flying wing.

This airplane is one of my more advanced designs developed from another person (menamiketrx on Youtube)'s design.

TAA USAF Designation: F3-1V

Step 1 Materials

Required:
1 sheet of 8.5 by 11 inch paper (A4)
Tape
Scissors
Optional:
Pencil 

Comments

[FrozenIce]

 were on earth is a bottom front

[OrigamiAirEnforcer]

The bottom front would be the bottom of the front of the aircraft. I've put a box around this area to clarify. 

[Matrix-technician]

Do you mean 2 and 1/4 inches?

[OrigamiAirEnforcer]

Yes.

[tonyrider]

How do u fly it
and will i tape the front of the extra triangle with the plane

[OrigamiAirEnforcer]

Well, to fly it you mustn't throw it like a dart. It will not fly correctly or perhaps at all. The Super Omniwing's "flying wing" configuration requires it be pitched down, and pushed forward at a moderate speed. Then release it. Although a different airplane, the OmniDelta's launch procedure is the same (see the picture below). And yes, the triangle that you've cut off the trailing edge of the plane should be folded up as pictured on Step 6 and then applied to the nose as a counterweight. Good luck!  

[legoman111]

i made a new desing based off this paper airplane

[OrigamiAirEnforcer]

Great! Can you post a picture?

[legoman111]

uh...now now but i will try to post it as soon as possible.

[ol987986]

sweet 5 star :)

[theswordninja561]

i must have done this wrong...mine goes straight down, and I've made the the omni-wing delta so i thought this wouldn't be a problem

[heavyfire88]

Lol... It is really EPIC ! NEAT 5PTS. :D

[Robert E Rogers]

If anyone would love to see my flying wing just let me know it's a monster. i can throw my flying wing 100ft or more in the air