How to Make Valentine Raggedy Heart Coasters

You will fall in love with these cute raggedy heart coasters. Scraps of fabric and quilt batting is all you need to complete this adorable project.

You will Need:

scraps of white fabric
scraps of red Valentine's day fabric
scraps of quilt batting
basic sewing needs

For this project and more visit:
http://www.lovetosew.com/raggedyheartcoasters.htm

Step 1:

First you will need to make yourself a heart pattern from paper. The heart should measure about 4".

Cut four squares of fabric measuring 5 1/2 ".

Pin and cut out the four hearts.

Step 2:

To make a set of four coasters you will need eight 6 1/2" squares of fabric for the coasters, and four 4 1/2" squares of quilt batting for the inside of the coasters.

Step 3:

Place one quilt batting in-between two 6 1/2" squares, just like a "sandwich", with the pretty sides of the fabric facing out.

Pin one heart on the top, in the center of the "sandwich" as shown in the photo.

Stitch around the heart using a 1/2" seam allowance.

Step 4:

Stitch around the outer edge of your "sandwich" using a 1" seam allowance.

Do this to all four "sandwiches."

Notice in the photo the stitching around the heart and around the outer edge of the "sandwich."

Step 5:

In order for your coaster to "rag" well, cut slits around your heart and the outer edge of the coaster making sure you do not cut into your stitching. The smaller the slits and closer together, the better the coasters will "rag."