Print PDF
Favorite
Email
This is a step by step tutorial on how to set up Rock Band 1 and 2 on Playstation 3 to a real drum kit.
What you'll need:
What you'll need:
- 5 piece drum kit (we used a Dixon Demon)
- Playstation 3 (or 2)
- RockBand 2 (or original RB)
- Rock Band Microphone and two guitar controllers
- 5 acoustic drum triggers, appropriate cables (cable connector types depends on the triggers and interface, just make sure they are compatible with each other)
- drum trigger interface
- Midi to USB Rock Band Adaptor
- RemO's Tone Control Rings
- Hart Dynamics Magnum mesh heads (optional)
- Blue, Red, Green, Yellow spray paint
- polycrylic spray coating
- 3M mounting tape
- orange construction paper
- Elmer's glue
- Pintech cymbal triggers (optional)
Remove these ads by
Signing UpStep 1Get the Gear and the Game
Get the Playstation 3 or 2, and the Rock Band or Rock Band 2 pack that comes with the drums, guitar and microphone, and game disc. Even through you will not use the drums, this pack is less expensive than buying the game, two guitar controllers, and the microphone separately. And if you want to return you drum kit to a normal later, you can use the included Rock Band drum kit to play the game. We used the Guitar Hero World Tour controller for our second guitar. You'll also need real drums. We used a Dixon Demon in Urban Camo.
| « Previous Step | Download PDFView All Steps | Next Step » |
http://gadgets.softpedia.com/newsImage/XCM-Adapter-Bringing-the-PS3-Controller-to-the-Xbox-2.jpg
here is a link to one