Introduction: How to Make a Attiny13 Programmer

Picture of How to Make a Attiny13  Programmer

Hey! everyone My name is Steve 19 year old from India

Today i'm going to show you How to make a Attiny13 Programmer .

How To Program it

Click Here to See The Video

Step 1: What You Need

Picture of What You Need
    • Arduino Board click
    • ATTINY13 click
    • 10uf Capacitor
    • Female Header click
    • led and a 330R resistance (optional )
    • SOP8 to DIP8 Adapter Socket (optional ) click
    • Standoffs click

    Step 2: Connection

    Picture of Connection

    If You want to make a PCB then click .

    • Arduino pin to Attiny 13 pin

    D10 to pin 1

    D11 to pin 5

    D12 to pin 6

    D13 to pin 7

    Ground to pin 4 (Ground)

    Vcc to pin 8 (Vcc)

    • Additional
    1. 10uf capacitor positive lead to reset pin and ground to ground
    2. Led with a resistance to 6th pin of ATtiny13 ( Test purpose only )

    Step 3: Finished

    Picture of Finished

    Final Product will look something like this


    warhawk8080 (author)2016-11-08

    Can you put your .brd on OSHPark?

    go to my YouTube it's there

    for sure

    About This Instructable




    Bio: Hi my name is Steve and i'm a Creative and I got Technical skills i can build anything just stick to my account . I ... More »
    More by Steve Willson Kujur:DIY 300 Watt 5.1 Channel Amplifier How to Make an Automatic 12V Battery ChargerFast Charging Anywhere
    Add instructable to: