Introduction: How to Make a Bluetooh Speaker

Picture of How to Make a Bluetooh Speaker

Hi guys i am homemade technology and today i am going to show how to make bluetooth speaker for cheap .

MATERIALS REQUIRED

1. pam8403 amplifier board

2. Bluetooth audio reciever

3. A box

4. 2 pieces 3 watt speaker [ i have pull it out from my old sound box you can buy from online or you can

also search in electronic store for speaker

5. Usb female plug

6. Usb cable and a usb charger

TOOLS REQUIRED

1. soldering iron

Step 1: 3 Watt Speaker

Picture of 3 Watt Speaker

This is a 3 watt is i have pull out from my old sound box . but you can buy from online or you can also search for

local electronics store for 3 watt speaker

Step 2: Bluetooth Audio Reciever

Picture of Bluetooth Audio Reciever

This is a bluetooth audio receiver . i have bought from amazon.in

Step 3: 5v Audio Amplifier Board

Picture of 5v Audio Amplifier Board

This is a 5v amplifier board . i also brought it from amazon.in for few rupees

Step 4: This Is the Circuit

Picture of This Is the Circuit

This is the circuit and the components are mentioned and their uses .

Step 5: Male Usb Cable

Picture of Male Usb Cable

This is a male usb cable i have taken it from my old mobile charger

Step 6: Male Usb Cable Cutting

Picture of Male Usb Cable Cutting

Cut usb cable from middle and after cutting you will see 4 wires green ,white ,red and black . green and white are useless red and black will connect to female usb plug red[+], black[-] .

Step 7: Finishing

Picture of Finishing

Hence it is completed put in a box and you can also decorate with some coloring paper.

if you have any question regarding this you can ask in comment

Thank you

Comments

DIY Hacks and How Tos (author)2016-11-12

Cool speaker project. You should enter it in the Amps and Speaker contest.

About This Instructable

3,404views

9favorites

License:

More by diy homemade science:How to Delete Temporary Files From Computerhow to make a bluetooh speaker
Add instructable to: