Step 3: Making the bow

Making the bow is very simple. All that needs to be done is to cut two notches in each end of the bow. The notches should go about half way into the bow, and should be about half an inch from each end of the bow. Also the notches must be on the side of the bow opposite the inside of the natural curve of the branch. It will help if they are at as much of a right angle as possible. These notches will be used to hold the bow string in place when it is in use. This is a little hard to explain so check the pictures below for some clarification.
<p>Can this bow be made with materials available during the stone age?</p>
Dose it hurt when u fire it?
<p>interesting. I also share a instructable similar to this, but use fiberglass,wood,leather as the material. The finish bow can be used for shooting&amp;hunting.</p>
<p>what type of string???????</p>
<p>any type of string should work, as long as it's strong enough.</p>
<p>hi i cant make one</p>
There is nothing wrong with being a predator as long as you are ethical .Never use an animal for target practice . Do not kill or wound for pleasure . People who harm living things for fun are soulless, cruel, and mentally damaged .
<p>Exactly, I despise of people who Kill for fun or pleasure</p>
Hey, what kind of string did you use? <br>What kind of string is the best for bow strings?
<p>Thin nylon rope should work fine.</p>
btw firstly a notch in the bottom at the side of the arrow is more reliable than a slit in the bottom and secondly the arrow is to be held with the thumb and the index finger ( the first crease from tip of finger)
<p>I am an archer, and another way is to put your index finger on top of the arrow and your middle finger underneath the arrow</p>
<p>Sorry, but how in the actual fuck do you tie that knot?</p>
I'm sorry but I don't think u had to explain how u have to shoot the bow if they don't know they don't need to know how to make one in my opiain
I agree with colbynguyen. And wouldn't the paper fletchings give you paper cuts while the arrow is flying?
thanks for the post
you put the fletchings too close to the end... it needs to be a little farther to the tip so that you can hold the bow properly.......
the fletching is to provide spin on an arrow in the same manner that the grooves on a modern firearm barrel cause a bullet to spin. this improves accuracy and stability tremendously while increasing the distance your projectile will travel. that is why smooth bore muskets are obsolete. it is simple physics. you will also increase your draw strength if you make your limbs of more than one type of material and laminate together. making a real bow is a very time consuming and intensive project if you want something that wont fall apart after the 5th shot.
No. the feathers create drag on the back of the arrow. this causes the front of the arrow to "lead" the rest of it as it goes along. While some arrows are designed to spin it isn't necesary. Bullets are stabilized by spinning causing a gyroscopic effect. That's why smooth bore rifles are VERY innacurate.
Smooth bore rifles ?
you're correct as to the fletching (feather) creating drag. as an amateur archer I conducted an experiment. I fletched my arrows straight and with a spin. the ones with spin were noticeably more accurate. also, every store bought arrow I ever saw was designed to spin.
But were you able to still make fairly accurate shots with the straight fletched arrows.
they were passably accurate fletched straight&nbsp;but were probly 25% more accurate with spin.
actually I think the flights are for keeping the arrow on a straight course
<p>There not called flights there called fletchings trust me iam in archery .</p>
So if you're &quot;In Archery&quot; shouldn't you know this?:It does not matter what you call them but vanes are only plastic or rubber. I've even heard my friend saying &quot;Fletches&quot;. <br>Outsmarted, <br>Highvoltageguy <br> <br>End of argument
They're not called either, they're called vanes.
Vanes are plastic fletchings are natural and flights is the term for both referring to some system of stabilization of the arrow in flight wether it make the shaft spin or just not flip end over end.
They are called any and all of these terms plus others. It depends on the person.
I suggest we just call them simply feathers for siplicity's sake and to avoid a very pointless argument...
If not using your bow for a while then take the string off it, so as not to make it weak. I only ever put two flights on my arrows and us tape for it...........
I have extra feathers laying around ...
I've been experimenting with making crossbows which are praps a little easier to make though don't have the same range. Being from Aus I can't source the traditional woods mentioned but I found that the Chinese Plum (prunus mume) is a good substitute. @archery+softball I used a trianlgular rasp. @Keli33, gamefreak360 I started off using kitchen twine but it kept stretching too much so I had to keep restringing my bow. Builders' line is excellent; it does stretch, but returns to its origional length instead of distorting. Hope that's useful :)
use a thin cane as ashaft for the arrow it makes th errow extremely light and will fly further
could i use some fishline string for this.<br>
with step 3, what's the best way to make the notch?
i think you must use a nylon string not a string <br>
This was a really good instructable. I made a decent bow, but the string is really tight. I was wondering how to make the bow bend more. Should i keep it strung for a while?
The fletching on an arrow shouldn't come that close to the nock. You want enough space for your fingers to fit between the nock and the fletching. Then you can draw the bow properly, using all your finger strength. Just curl the fingertips of your index, middle and ring finger around the string with the arrow between your index and middle finger.
That's a common <a href="http://howiw.com/index.php?title=How_to_Make_a_Bow_and_Arrow" rel="nofollow">mistake</a> that a lot of us have.
I have read all the comments and am confused that there has been very little criticism of the actual quality and workmanship of the bow. I am no expert but it does look a little on the shonky side. I am sure that Bear Grylls could comment further on this and give some technical advice.
people just go to walmart with 3 dlars and buy an actual arrow that works garanteed
im from spain and here we dont have wallmarts(in fact where i live there arent shops that sell thing like that at all)<br />
Yeah u have Walmarts, ASDA or something is europes walmart but trust me theres a walmart in just about every single country on earth wal-mart is a HUGE company
Yeah, we have ASDA in the UK but you'll never find arrows in there!
Walmart may be a huge company, but that doesn't mean people shop there. Also just because someone has on in their country, doesn't mean that it is right down the street. I mean, who in their right mind would bus somewhere for 6hrs just to shop at Walmart? <br> <br>I know that Walmart is having a lot of trouble marketing in Europe because a lot of Europeans shop at the stores they've been going to all their lives. The same stores their parents shopped at, and their parents before them.
australia dont have it
they have asda where i lve and they dont sell that sorta stuff...
No walmarts in australia as far as i know

About This Instructable


101 favorites


Bio: Hi! I'm a freshman in college at California Polytechnic State University, majoring in Aerospace engineering. I interned for a short period at Instructables and ... More »
More by alfonso: Hack the Start Button! Song-following Led-flashing Hack-O-Lantern! Customize your computer!
Add instructable to: