Instructables
loading
loading

Step 3: Layout, Cutout

Picture of Layout, Cutout
IMG_1745.JPG
IMG_1748.JPG
IMG_1750.JPG
IMG_1753.JPG
IMG_1752.JPG
IMG_1751.JPG
IMG_1755.JPG
IMG_1758.JPG
To get all of the pieces of the flower, I traced the patterns onto the brass three times each. It's best to place all of the pieces as close to the edge as possible in order to reduce waste. At this point in the project, it starts to become very important to take your time. Be patient and think things through. Remember: Haste yields Waste.
 
Remove these adsRemove these ads by Signing Up