Since the original vinyl case is cheaply made, I made a card key case out of leather.
Leather material gives it a more luxurious feel.
Step 1: Prepare the Template
Prepare the template that is larger than the actual size of the card key case.
Step 2: Cut Out the Leather
Cut out the leather with a leather cutter.
Be careful not to cut your fingers!
Step 3: Needed to Complete Project
These are all the materials you will need to complete the project.
Step 4: Draw the Seam Line for the Materials
Draw a line to show the sewing line.
At this time, draw a line about 0.1 inch away the sewing line from the edge.
Step 5: Glue the Leather
Glue the leather together using elastomeric adhesive which is used to glue leather.
Step 6: Draw the Seam Line for the Card Key Case and Pierce It With a Hammer
At this time, draw a line on the card key case to make the sewing line.
Pierce it with a hammer on the sewing line.
Step 7: Sew It
After the glue has dried, sew it with the wax cord.
Step 8: Attach a Ring
Attach a ring to attach a key ring.
Step 9: Polish the Leather Edge
Apply oil to the leather edge and polish it with the stick of the wood.