With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This three dimensional companion cube makes a great knickknack for your desk, and an even better gift. What gamer wouldn't want to receive a companion...
You will need: perler beads (white, pink, dark grey), a hot glue gun (with glue sticks), perler pegboards (a circle and a square one), an iron, and ir...
Make the white corner pieces by placing the beads on the pegboard. There are 3 different pieces in one set. You will need 8 corner sets total.
Fuse the beads by placing a sheet of wax paper over them. Gently iron them at medium heat for a few seconds. *Make sure you don't over melt the beads ...
There are 2 pieces in one set. You will need 12 edge sets. Fuse when finished.
You will need 6 circles total. Fuse them when finished.
You will need 2. Fuse when finished. (The outline is just for emphasis on the detailed "teeth" portions.)
You will need 2. Fuse when finished.
You will need 2. Fuse when finished.
You will need 6 total. Fuse when finished.
You will now have a 3D cube. *Be gentle, don't break the "teeth" pieces while snapping them together.*
Make sure the hearts are centered on the white circles. Hot glue them together.
Glue the corner pieces to the 3D cube.
One per edge. Align them with the pink lines on the square faces.
One circle per side. Voila!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »