This tutorial shows you how to work with fiberglass to make a sub box located in your trunk behind your wheel wells. Although this tutorial is made to go into your wheel well areas, you could use this tutorial for anything, kick panels, racks, and other speaker boxes. If you have some knowledge of working with glass, then this should be a walk in the park.
What you'll need:
-1 Gallon Polyester Fiberglass Resin
-Additional Resin Hardener
-MDF (For supports, and speaker rings)
-Dremel / Rotozip / Cutter
-A GOOD Respirator
-Disposable Paintbrushes Brushes
-Glue Gun, or Adhesive Spray
This project will not be easy, it will require about 30 hours of work, drying, and adjustment time. Expect at least 8 hours of working on the first day to get your car in order, and get a good pull of your trunk space. In the end you should have a show winning sound set up that will look as good as it will sound.