Introduction: How to Make a Flower Charm on Rainbow Loom
I hope you all enjoy my first instructables! Please comment, ask, and suggest!
Step 1: Supplies
You need the following:
Step 2: Placing the Rubber Bands
Start from the bottom and place three in a half hexagon format. Start from the bottom again and do the same on the opposite side.
Step 3: Clockwise Rubber Band
Start from the middle and put a band to the right top like in the picture. Then go clockwise like a starburst.
Step 4: Band Cap
Put a band cap in the middle.
Step 5: Petals
Put full circle rubber bands on the corners.
Step 6: Hooking
Turn your loom so that the arrow is facing you. In the middle grab the band facing you. Hook it to it's acrostic neighbor. Do it all the way around.
Step 7: Boarder Hooking
You grab the bottom one in front of you. Do it until you get to the top. You start from the right and do the same thing.
Step 8: Tie It
You tie with a rubber band at the top.
Step 9: Pull It Off and Enjoy
Now pull it off and you have yourself a flower!