Introduction: How to Make a Mini Scraper With Peg
This is a tutorial to make a mini scraper with peg.
Step 1: Materials
The materials are:
- Tape*You cann use if you want , in this case I dont used it.*
Step 2: Screwdriver
Now we proceed to remove the blade with the screwdriver.
Step 3: Disarm
We proceed to disarm the peg.
Step 4: Cutter
With the cutter we cut in the middle the peg , the same way like the picture.
Step 5: Glue
In the blade we add glue to stick to the peg.
Step 6: Prove
Now just look some place to use your mini scraper.