Step 6: Cut and Trace
Print one of the headband pictures from Step 1. If you want a different symbol, just print that up as well (picture 1).
Cut the headband picture out of the paper (picture 2).
Set it on the aluminum and trace the shape onto it (picture 3).
Cut the headband picture out of the paper (picture 2).
Set it on the aluminum and trace the shape onto it (picture 3).
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpamjdamm says:
Jun 28, 2011. 2:02 AMReply
how long was your paper for the sign
Visit Our Store »
Go Pro Today »
