Instructables
Picture of How to Make a Ninja Star!
This is a tutorial on a ninja star that i have made from a CD.  hope this works for you.
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
1. CD
2. Scissors
3. Tape (electric or duct)
4. marker
5. template (below)
                                  
                           

Step 2: Getting started

Picture of getting started
IMG_7802.JPG
IMG_7807.JPG
IMG_7808.JPG
IMG_7811.JPG
First cut the template out and draw it of the CD. Then  start cutting out the CD but with care remember no need to rush.

Step 3: Taping

Picture of taping
IMG_7815.JPG
now apply tape to the middle section as seen in the image and then your done.

Step 4: Throwing !!!!!

Picture of Throwing !!!!!
 what ever stencil you use will work  and be creative.



- zerv

Right after I saw this I built one. It was real easy, but I threw it at a tree(bad idea), and part of it broke... :)